OCAD Präferenzen: Unterschied zwischen den Versionen
|Zeile 158:||Zeile 158:|
[[File:Hint.jpg]] OCAD uses the choosen mark color only on white background. Otherwise OCAD choose a color with high contrast.<br />
[[File:Hint.jpg]] OCAD uses the choosen mark color only on white background. Otherwise OCAD choose a color with high contrast .<br />
Version vom 28. November 2012, 09:20 Uhr
Some preferences are not available in the OCAD 11 Starter and OCAD 11 Course Setting editions.
- 1 GUI (Graphical User Interface)
- 2 File
- 3 View
- 4 Select
- 5 Object
- 6 Drawing and Editing
- 7 Symbol
- 8 GPS
- 9 Warnings
- 10 General
GUI (Graphical User Interface)
If enabled, the context menu is shown by clicking on the drawing area with the right mouse button.
In the upper part of the Context menu, you can switch between the current Drawing Mode, the Select and Edit Object mode and the Select Object and Edit Vertex mode.
In the lower part of the Context menu, you can change the view either with the Pan, Zoom In, Zoom Out or the Show Entire Map tool.
If disabled, you can switch between the current Drawing Mode and the Select Object and Edit Vertex mode by clicking on the drawing area with the right mouse button.
Wider splitter between drawing area and symbol box
Show or Hide the following toolbars in this field:
- Editing and Drawing Toolbar
- Edit Functions Toolbar
- Mobile Toolbar
- Numeric Keypad Toolbar
- Standard Toolbar
- View Toolbar
Click the Customize button to add or remove icons to/from the toolbars.
Choose the format of the coordinates appearing in the Status Bar in this box.
Change the virtual appearance of the GUI by choosing one in the dropdown list.
Auto file load when opening OCAD
Check this box to load the last map you worked on automatically when OCAD is started. Otherwise no map will be loaded.
Auto file save
This option is not enabled when a map is loaded. Please close all maps before opening OCAD Preferences.
Check this box to save all changes to the original file automatically.
When this box is not checked, all changes are saved in a temporary file. When you close the file you will be asked if you want to save the changes to the original file.
This option has no effect for untitled files (new files which have never been saved to disk).
Enter a value to specify the User Defined Zoom. Choose User Defined in the View menu to apply the specified zoom to the map.
View mode loop
With the View mode loop tool you can easily switch between different view modes. Select the view modes you want to switch between in the View mode loop box in the View category of OCAD Preferences.
To use the View mode loop you have to define a Shortcut for View - View Mode Loop. Afterwards you can switch between the set view modes using the Shortcut.
Visit the View Mode Loop article to get more information about this function.
On some monitors colors and gamma of the map are not displayed correctly. Use the controller to regulate the color and gamma manually. Click on the Standard button to set the Color Correction back to default.
Redraw background automatically
If this option is enabled, the map is redrawn after every single modification of the map (This may reduce the performance of OCAD). Otherwise you have to press the F5 key or select Redraw in the View menu to redraw the map.
Faster text rendering
Enable the Faster text rendering option to render text faster and less precisely. This may increase the performance of OCAD.
In this section of the OCAD Preferences the color and the appearance of the Screen Grid can be changed.
Click the Default button to reload the default gray color.
Choose a Style from the dropdown menu. The Screen Grid can either be Solid, Dashed or Dotted.
You can choose between two modes to select multiple objects:
- All objects must be with at least one vertex in the selection.
- All objects must be completely in the selection.
You can find more information about selecting multiple objects on this page: Select and Edit Multiple Objects.
Choose a color for Unsymbolized Objects by clicking on the Setup icon. The Color Picker dialog appears and you can configure the color.
Drawing and Editing
Drawing Bézier curves
Choose the preferred mode for drawing curves.
- In OCAD mode, only the direction of a dragged tangent is used. The distance from the normal vertices to the curve vertices is calculated automatically. This is the recommended mode.
- In Illustrator mode, the length of the dragged tangent is used to calculate the distance of the curve vertex.
You can find more about drawing curves on the following page: Draw a Curve.
Convert freehand to curve when drawing
Check this box to convert lines and areas to curves when drawing in freehand mode. Otherwise they remain as polygons. The settings made in the Smooth when drawing freehand dropdown list of the Tolerances field determine the smoothing level.
Close area objects when drawing
OCAD closes area objects automatically if this option is checked. If the start and end point are different, OCAD adds an end point with the same position as the start point.
Choose Close Area Objects in the Topology part of the Object menu to close already drawn area objects.
Following existing objects
Uncheck the Side lines of double lines option if side lines of double lines should not be traced when you are following existing lines. You can find more about this topic on the Following Existing Objects page.
- Select objects: This tolerance defines the maximum distance on each side of a thin line where you can click to select it. Objects with a thicker main line than the tolerance level can be selected by clicking on the entire line width. The default value is 3 pixels.
- Snapping: If you activate the Snapping tool, moving a vertex close to an objects has a snapping effect. This tolerance defines the maximum distance you have to approach to the object, so that the vertex snaps to it. The default value is 5 pixels.
- Join when drawing lines: This tolerance defines the maximum distance a vertex has to approach to another line end to join it. The default value is 0.25 mm. If the line width is bigger than this tolerance then OCAD takes the line width as the tolerance.
- Smooth when drawing freehand: There are three smoothing levels for freehand drawing mode: slightly, medium and strong. They correspond to 0, 1 and 2 in earlier OCAD versions.
- Change to Bezier curve: This tolerance defines the maximum distance the vertices can move away from the original position by changing from polyline to Bezier curve. The default value is 0.10 mm. Note that the distance between the curve and the polyline can be greater between the vertices.
- Smooth (generalization): This tolerance is used by the Douglas-Peucker smoothing algorithm. Vertices that are closer to the direct line between the previous and the next vertex are removed. The default value is 0.05 mm.
This smooth tolerance is also used in the 'Change to Polyline' function.
You can change the cursor color to black, red, blue, purple or yellow by selecting a color in the dropdown list.
Enable live preview
Enable this option to show the real line width when drawing line objects.
Check this option if the map view should automatically scroll if you drag out of the drawing area. Disable Auto scroll if you have a slow PC.
Default symbol folder
You can change the default symbol folder by clicking on the Browse icon. Choose a folder as default symbol folder which you want to load symbols from when you create a new map. Click on the Delete icon to clear the current folder path. If no folder is selected, OCAD loads symbols from the Symbol folder in the OCAD program directory (usually: C:\Program Files\OCAD\OCAD 11\Symbol\) when you want to create a new map.
- Selected symbol blink in symbol box: If you check this option, the selected symbol blinks in the symbol box. This illustrates the selected symbol.
- Lock symbol positions in symbol box: If you check this option, you are not able to drag and drop a symbol to a new position in the symbol box.
- Auto select symbol when selecting object: If you check this option, the corresponding symbol is automatically selected when you select an object. This does not work when you select multiple objects.
GPS Log File
Check the Log all positions sent from gps option to save all position sent from a GPS device in real time to a log file (Text-File). Click the Browse icon to choose a folder, the log files are saved to. The log files are named with the date and time the real time GPS is enabled.
These warnings can be activated when you either print, export or import a map. If you check those options, you will get a warning message if you have hidden symbols on the map and you are trying to carry out one of mentioned operations.
Disable the option Check for Service Updates when you start OCAD to not check for new free Service Updates when you start OCAD. Is some cases this check takes too long.
Known bugs are corrected in Service Updates. Therefore we recommend using OCAD software always with the most recent Service Update to benefit from the quality improvements. The latest Service Update is also available on our website in the Download section.