Bahnlegung Export: Unterschied zwischen den Versionen

Aus OCAD 11 Wiki - Deutsch
Zur Navigation springen Zur Suche springen
Zeile 2: Zeile 2:
 
''(This function is only available in course setting projects!)''
 
''(This function is only available in course setting projects!)''
  
 +
In the '''Export''' submenu of the '''Course Setting''' menu you have different options for an export.
  
 
==Export Courses XML==
 
==Export Courses XML==
  
Choose this command to export a XML file with course data. OCAD supports IOF Version 2.0.3 and 3.0.
+
Choose this command to export a XML file with the course data. OCAD supports the IOF Version 2.0.3 and 3.0.
  
The exported XML file is opened automatically. The 'IOFdata.dtd' also belongs to the XML file. This document type definition file specifies the structure of the XML document.
+
The exported XML file is opened automatically. The '''IOFdata.dtd''' file also belongs to the XML file. This document type definition file specifies the structure of the XML document.  
 
 
The exported XML file can be read from the event software.
 
  
 +
The exported XML file can be read from several event softwares.
  
 
==Export Courses Text==
 
==Export Courses Text==
  
Choose this command to export a list of control numbers of the courses or classes in text file. The dialog box '''Export Courses (Text)''' appears.
+
# Choose this command to export a list of control numbers of the courses or classes in text file.  
 +
# The dialog box '''Export Courses (Text)''' appears.
 +
# Choose wheter you want to export '''[[Create a New Course|Courses]]''' or '''[[Create a New Claass|Classes]]'''
 +
# Check the '''Export climbing''' option when climbing shall be exported, too.
 +
# Check the '''Export number of controls''' option to export also the number of controls.
  
'''Format of the exported file'''
+
'''Format of the exported file''':
# Class name as entered in the Classes dialog box or course name.
+
# The class name as entered in the '''[[Create a New Class|Classes]]''' dialog box or the '''[[Create a New Course|Course Name]]'''.
# Length of the course in km (calculated length + extra length entered in the Courses dialog box).
+
# Length of the course in km (calculated length plus extra length entered in the '''[[Create a New Course|Courses]]''' dialog box).
# Climb of the course as entered in the Courses dialog box.
+
# Climb of the course as entered in the '''[[Create a New Course|Courses]]''' dialog box.
 
# Number of controls.
 
# Number of controls.
# Start, all controls and finish.
+
# Start, all controls and finish ('''[[Create Relay Courses|Relay]]''' variations are indicated in brackets)
 
 
Example:
 
H20 6.3150 20 S1-31-32-33-54-34-35-36-70-38-39-69-73-42-43-44-67-50-47-56-99-F1
 
D20 5.6120 17 S1-46-72-55-34-35-70-38-71-63-42-43-64-45-50-47-48-99-F1
 
 
 
'''Export'''
 
'''Courses:''' Choose the option to export the courses.
 
'''Classes:''' Choose the option to export the classes as entered in the Classes dialog box.
 
 
 
'''Export Climbing'''
 
Activate this option to export the climbing.
 
 
 
'''Export number of controls'''
 
Activate this option to export the number of controls.
 
  
The exported file is opened automatically in a text editor.
+
'''Example''':
 +
  Normal Course 5.7 130 19 S1-117-150-107-63-93-99-97-98-64-140-52-87-132-95-116-90-47-120-115-F1
 +
  Relay.1 3.3 85 12 S1-(71/117/118)-64-(78/140/70)-52-(-(106-132/87-56))-95-116-90-47-120-115-F1
  
 +
The exported file is opened automatically in a text editor.<br />
 +
[[File:Hint.jpg]] When you export '''[[Create Relay Courses|Relay Courses]]''' each leg is exported individually.
  
==Export Courses Version 8 Text==
+
==Export Classes Version 8 Text==
  
Choose this command to export a list of the control numbers of the courses.  
+
Choose this command to export a list of the control numbers of the classes.  
  
The exported file can then be imported to the event software.
+
The exported file can then be imported in several event softwares.
 
 
After choosing this command a file dialog box appears where you can choose a path and enter file name for the course file.
 
  
 +
After choosing this command the '''Export Classes (Version 8)''' dialog box appears where you can choose a path and enter the file name for the class file.
  
 
'''Format of the exported file'''
 
'''Format of the exported file'''
The exported file is a text file. For normal courses there is one line per course/class, for relay courses and one-man relay courses there is one line per runner (the range of start numbers must have been defined in the Courses dialog box). The fields are separated with semicolons (;). It contains the following fields:
+
The exported file is a text file. For normal courses there is one line per class, for relay courses and one-man relay courses there is one line per runner (the range of start numbers must have been defined in the '''[[Create a New Class|Classes]]''' dialog box). The fields are separated with semicolons (;) and contain the following information:
  
# Class name as entered in the Classes dialog box. If courses are exported (see above Export) then this field remains empty.
+
# Class name as entered in the '''[[Create a New Class|Classes]]''' dialog box. If classes are created automatically, this field is empty.
 
# Course name.
 
# Course name.
 
# Start number.  
 
# Start number.  
 
:* for normal courses this number is "0".
 
:* for normal courses this number is "0".
:* for relay courses this is the start number of the team, a point and the number of the runner (e.g. "101.1")
+
:* for relay courses this is the start number of the team, a point and the number of the leg-runner (e.g. "101.1")
 
:* for one-man relay courses this is the start number (e.g. "201")
 
:* for one-man relay courses this is the start number (e.g. "201")
 +
: 4. Length of the course in km (calculated length plus extra length entered in the '''[[Create a New Course|Course]]''' dialog box).
 +
: 5. Climbing of the course as entered in the '''[[Create a New Course|Courses]]''' dialog box.
 +
: 6. All controls, starting with the start, then the controls and finally the finish. Between the controls the distance to the next control is indicated.
  
: 4. Length of the course in km (calculated length + extra length entered in the Course dialog box).
+
'''Example''':
: 5. Climb of the course as entered in the Courses dialog box.
+
  M16;Normal Course;0;5.700;130;S1;0.219;117;0.412;150;0.502;107;0.155;63;0.113;93;0.176;99;0.183;97;0.488;98;0.659;64;0.661;140;0.191;52;0.198;87;0.391;132;0.249;95;0.098;116;0.152;90;0.179;47;0.216;120;0.280;115;0.229;F1
: 6. All controls, starting with the start, then the controls and finally the finish. Between the controls is the distance of the controls in km.
+
  Relay;Relay;1.1;3.300;205;S1;0.185;71;0.351;64;0.661;140;0.191;52;0.225;106;0.286;132;0.249;95;0.098;116;0.152;90;0.179;47;0.216;120;0.280;115;0.229;F1
 +
  Relay;Relay;1.2;3.400;205;S1;0.219;117;0.246;64;0.733;70;0.207;52;0.198;87;0.341;56;0.281;95;0.098;116;0.152;90;0.179;47;0.216;120;0.280;115;0.229;F1
 +
  Relay;Relay;1.3;3.400;205;S1;0.287;118;0.360;64;0.596;78;0.303;52;0.225;106;0.229;56;0.281;95;0.098;116;0.152;90;0.179;47;0.216;120;0.280;115;0.229;F1
  
 
The exported file is opened automatically in a text editor.
 
The exported file is opened automatically in a text editor.
 +
 +
[[File:Hint.jpg]] '''[[Create a New Class|Classes]]''' have to be defined to use this function. Otherwise, an error message will appear.
  
  
 
==Export Courses GPX==
 
==Export Courses GPX==
  
Choose this command to export courses to a GPX file.
+
Choose this command to export courses to a GPX-File. '''[[Create Relay Courses|Relay Courses]]''' and '''[[One-Man Relay Courses]]''' cannot be exported to a GPX-File.
  
 
All course setting objects (start, controls, finish) are exported as waypoints.
 
All course setting objects (start, controls, finish) are exported as waypoints.
 
All courses, including start, controls, marked routes and finish are exported as tracks.
 
All courses, including start, controls, marked routes and finish are exported as tracks.
  
 
+
[[File:Hint.jpg]] This command needs real world coordinates and a coordinate system. Choose the '''[[Map#Set_Scale_and_Coordinate_System|Set Scale and Coordinate System]]''' command from the '''[[Map]]''' menu to change these settings.<br>
[[File:Hint.jpg]] This command needs real world coordinates and a coordinate system. Choose [[Map#Set_Scale_and_Coordinate_System|Set Scale and Coordinate System]] from the '''Map''' menu to change these settings.<br>
+
[[File:Hint.jpg]] To open the exported file choose the '''[[File#Open_Recently_Exported_Documents|Recently Exported Documents]]''' command from the '''[[File]]''' menu.
[[File:Hint.jpg]] To open the exported file choose '''Recently Exported Documents''' from the '''File''' menu.
 
  
 
==Export Course Statistic and Event Statistic==
 
==Export Course Statistic and Event Statistic==
  
Use this command to export course, leg and event statistics to a text file. This export is also available via [[Course_Statistic_and_Event_Statistic|Course Statistic and Event Statistic]] in the '''Course Setting''' menu.
+
Use this command to export course, leg and event statistics to a text file. The text file contains the same information as in the '''[[Course Statistic and Event Statistic]]''' dialog. This export is also available via the '''[[Course Statistic and Event Statistic]]''' command in the '''Course Setting''' menu.
  
  
 
==Export Course Maps==
 
==Export Course Maps==
  
Use this command to make graphic modifications to courses that are not possible within the course setting project. The common modifications like moving the control numbers or modifying the connection lines are possible without using this command. See Making Modifications for more information.
+
Use this command to '''[[Make Graphic Modifications]]''' to courses that are not possible within the course setting project. The common modifications like moving the control numbers or modifying the connection lines are possible without using this command. Visit the '''[[Make Graphic Modifications]]''' page for more information.
  
'''Using this command may be dangerous.''' If you make modifications to the courses after exporting the course maps, the exported course maps are not updated and are therefore not correct. Only use this command if you are absolutely sure that the courses are final.  
+
A course map file is a normal OCAD-File and not a course setting file. The '''[[Background Map]]''' will be the same as in the course setting file. All symbols used for course setting are imported in the symbol set. Opening course maps is also possible in the '''OCAD Course Setting for Orienteering''' edition.  
  
 +
'''Using this command may be dangerous.''' If you make modifications to the courses after exporting the course maps, the exported course maps are not updated and are therefore not correct. Use this command only if you are absolutely sure that the courses are final.
  
'''Select'''
+
# Choose the '''Course Maps''' command from the '''Export''' submenu of the '''Course Setting''' menu.
 
+
# The '''Select Courses/Classes''' dialog appears.
Select the courses or classes to be exported.  
+
# Select wheter you want to export '''[[Create a New Course|Courses]]''' or '''[[Create a New Class|Classes]]'''.
 
+
# Select all courses/classes to be exported. Select multiple courses/classes by holding the '''Ctrl''' key or click the '''Select all''' button to select all courses/classes.
You can select several courses or classes.
+
# If multiple courses/classes are selected they are exported in different files unless you check the '''Export courses to one file''' option. Choose wheter you want to place the courses beside each other or at the original position.
 
+
# Click the '''OK''' button when finished.
Click the '''Select all''' button to select all courses or classes.
 
 
 
  
 
==Export Control Description Text==
 
==Export Control Description Text==
  
Use this command to export control descriptions as text files.  
+
Use this command to export control descriptions as text files. Control descriptions for '''[[Create Relay Courses|Relay Courses]]''' and '''[[One-Man Relay Courses]]''' cannot be exported.
  
 +
# Choose the '''Export Control Description (Text)''' command from the '''Export''' submenu of the '''Course Setting''' menu.
 +
# The '''Select Courses/Classes''' dialog appears.
 +
# Select wheter you want to export control descriptions of '''[[Create a New Course|Courses]]''' or '''[[Create a New Class|Classes]]'''.
 +
# Select all courses/classes the control description is to be exported. Select multiple courses/classes by holding the '''Ctrl''' key or click the '''Select all''' button to select all courses/classes.
 +
# If multiple courses/classes are selected they are exported in the same file beneath eachother.
 +
# Click the '''OK''' button when finished.
  
'''Select Courses/Classes'''
+
[[File:Hint.jpg]] A '''[[Edit Text Control Description|Text Control Description]]''' has to be defined to get an useful output of this function.
 
 
Select the courses or classes to be exported.
 
 
 
You can select several courses or classes.
 
 
 
Click the '''Select all''' button to select all courses or classes.
 
 
 
  
 
==Export Relay Variations==
 
==Export Relay Variations==
Zeile 116: Zeile 113:
 
# The '''Export Relay Variations''' dialog appears.
 
# The '''Export Relay Variations''' dialog appears.
 
# Browse a location and enter a name for the file to export.
 
# Browse a location and enter a name for the file to export.
# Click the '''Save''' button to export the txt-file.
+
# Click the '''Save''' button to export the TXT-file.
  
 
The Text-File contains all courses. The start numbers are listed with the corresponding variation.
 
The Text-File contains all courses. The start numbers are listed with the corresponding variation.
Zeile 123: Zeile 120:
  
  
 
+
----
Back to [[Course Setting for Orienteering]]
+
Back to the '''[[Course Setting for Orienteering]]''' page.

Version vom 6. Juli 2012, 09:38 Uhr

(This function is only available in course setting projects!)

In the Export submenu of the Course Setting menu you have different options for an export.

Export Courses XML

Choose this command to export a XML file with the course data. OCAD supports the IOF Version 2.0.3 and 3.0.

The exported XML file is opened automatically. The IOFdata.dtd file also belongs to the XML file. This document type definition file specifies the structure of the XML document.

The exported XML file can be read from several event softwares.

Export Courses Text

  1. Choose this command to export a list of control numbers of the courses or classes in text file.
  2. The dialog box Export Courses (Text) appears.
  3. Choose wheter you want to export Courses or Classes
  4. Check the Export climbing option when climbing shall be exported, too.
  5. Check the Export number of controls option to export also the number of controls.

Format of the exported file:

  1. The class name as entered in the Classes dialog box or the Course Name.
  2. Length of the course in km (calculated length plus extra length entered in the Courses dialog box).
  3. Climb of the course as entered in the Courses dialog box.
  4. Number of controls.
  5. Start, all controls and finish (Relay variations are indicated in brackets)

Example:

 Normal Course	5.7	130	19	S1-117-150-107-63-93-99-97-98-64-140-52-87-132-95-116-90-47-120-115-F1
 Relay.1	3.3	 85	12	S1-(71/117/118)-64-(78/140/70)-52-(-(106-132/87-56))-95-116-90-47-120-115-F1

The exported file is opened automatically in a text editor.
Hint.jpg When you export Relay Courses each leg is exported individually.

Export Classes Version 8 Text

Choose this command to export a list of the control numbers of the classes.

The exported file can then be imported in several event softwares.

After choosing this command the Export Classes (Version 8) dialog box appears where you can choose a path and enter the file name for the class file.

Format of the exported file The exported file is a text file. For normal courses there is one line per class, for relay courses and one-man relay courses there is one line per runner (the range of start numbers must have been defined in the Classes dialog box). The fields are separated with semicolons (;) and contain the following information:

  1. Class name as entered in the Classes dialog box. If classes are created automatically, this field is empty.
  2. Course name.
  3. Start number.
  • for normal courses this number is "0".
  • for relay courses this is the start number of the team, a point and the number of the leg-runner (e.g. "101.1")
  • for one-man relay courses this is the start number (e.g. "201")
4. Length of the course in km (calculated length plus extra length entered in the Course dialog box).
5. Climbing of the course as entered in the Courses dialog box.
6. All controls, starting with the start, then the controls and finally the finish. Between the controls the distance to the next control is indicated.

Example:

 M16;Normal Course;0;5.700;130;S1;0.219;117;0.412;150;0.502;107;0.155;63;0.113;93;0.176;99;0.183;97;0.488;98;0.659;64;0.661;140;0.191;52;0.198;87;0.391;132;0.249;95;0.098;116;0.152;90;0.179;47;0.216;120;0.280;115;0.229;F1
 Relay;Relay;1.1;3.300;205;S1;0.185;71;0.351;64;0.661;140;0.191;52;0.225;106;0.286;132;0.249;95;0.098;116;0.152;90;0.179;47;0.216;120;0.280;115;0.229;F1
 Relay;Relay;1.2;3.400;205;S1;0.219;117;0.246;64;0.733;70;0.207;52;0.198;87;0.341;56;0.281;95;0.098;116;0.152;90;0.179;47;0.216;120;0.280;115;0.229;F1
 Relay;Relay;1.3;3.400;205;S1;0.287;118;0.360;64;0.596;78;0.303;52;0.225;106;0.229;56;0.281;95;0.098;116;0.152;90;0.179;47;0.216;120;0.280;115;0.229;F1

The exported file is opened automatically in a text editor.

Hint.jpg Classes have to be defined to use this function. Otherwise, an error message will appear.


Export Courses GPX

Choose this command to export courses to a GPX-File. Relay Courses and One-Man Relay Courses cannot be exported to a GPX-File.

All course setting objects (start, controls, finish) are exported as waypoints. All courses, including start, controls, marked routes and finish are exported as tracks.

Hint.jpg This command needs real world coordinates and a coordinate system. Choose the Set Scale and Coordinate System command from the Map menu to change these settings.
Hint.jpg To open the exported file choose the Recently Exported Documents command from the File menu.

Export Course Statistic and Event Statistic

Use this command to export course, leg and event statistics to a text file. The text file contains the same information as in the Course Statistic and Event Statistic dialog. This export is also available via the Course Statistic and Event Statistic command in the Course Setting menu.


Export Course Maps

Use this command to Make Graphic Modifications to courses that are not possible within the course setting project. The common modifications like moving the control numbers or modifying the connection lines are possible without using this command. Visit the Make Graphic Modifications page for more information.

A course map file is a normal OCAD-File and not a course setting file. The Background Map will be the same as in the course setting file. All symbols used for course setting are imported in the symbol set. Opening course maps is also possible in the OCAD Course Setting for Orienteering edition.

Using this command may be dangerous. If you make modifications to the courses after exporting the course maps, the exported course maps are not updated and are therefore not correct. Use this command only if you are absolutely sure that the courses are final.

  1. Choose the Course Maps command from the Export submenu of the Course Setting menu.
  2. The Select Courses/Classes dialog appears.
  3. Select wheter you want to export Courses or Classes.
  4. Select all courses/classes to be exported. Select multiple courses/classes by holding the Ctrl key or click the Select all button to select all courses/classes.
  5. If multiple courses/classes are selected they are exported in different files unless you check the Export courses to one file option. Choose wheter you want to place the courses beside each other or at the original position.
  6. Click the OK button when finished.

Export Control Description Text

Use this command to export control descriptions as text files. Control descriptions for Relay Courses and One-Man Relay Courses cannot be exported.

  1. Choose the Export Control Description (Text) command from the Export submenu of the Course Setting menu.
  2. The Select Courses/Classes dialog appears.
  3. Select wheter you want to export control descriptions of Courses or Classes.
  4. Select all courses/classes the control description is to be exported. Select multiple courses/classes by holding the Ctrl key or click the Select all button to select all courses/classes.
  5. If multiple courses/classes are selected they are exported in the same file beneath eachother.
  6. Click the OK button when finished.

Hint.jpg A Text Control Description has to be defined to get an useful output of this function.

Export Relay Variations

  1. Choose the Export Relay Variations command in the Export submenu of the Course Setting menu.
  2. The Export Relay Variations dialog appears.
  3. Browse a location and enter a name for the file to export.
  4. Click the Save button to export the TXT-file.

The Text-File contains all courses. The start numbers are listed with the corresponding variation.

Learn more about relays on the Create Relay Courses page.



Back to the Course Setting for Orienteering page.