Difference between revisions of "Create a New Map"

From OCAD Wiki - English
Jump to: navigation, search
(Setting the Map Scale)
Line 64: Line 64:
 
#In the '''Grid distance''' field, enter the desired value for the coordinate grid and click '''OK'''.
 
#In the '''Grid distance''' field, enter the desired value for the coordinate grid and click '''OK'''.
 
:[[File:Hint.JPG|hint]] Enter the coordinate values for the center of your map in the horizontal and vertical offset fields. This is important since the drawing area of OCAD is limited to 4 x 4 m in the Standard Edition and 80 x 80 m in the Professional Edition. This option is used to ensure that imported spatial base data, georeferenced raster maps and GPS measurements do not lie outside the drawing area.
 
:[[File:Hint.JPG|hint]] Enter the coordinate values for the center of your map in the horizontal and vertical offset fields. This is important since the drawing area of OCAD is limited to 4 x 4 m in the Standard Edition and 80 x 80 m in the Professional Edition. This option is used to ensure that imported spatial base data, georeferenced raster maps and GPS measurements do not lie outside the drawing area.
 +
 +
 +
'''Map Type'''
 +
 +
: '''Normal map:''' Choose this option if you want to start a new map.
 +
 +
'''Orienteering map'''
 +
 +
: '''Course setting project for orienteering:''' Choose this option if you want to start a course setting project.
 +
: '''Load colors and symbols from'''
 +
Choose a map from which the symbols should be copied to the new map. Click on a map to see the file information. Double click on the desired map to create a new map.
 +
The box lists all OCAD maps in the SYMBOL subdirectory. You may add your own symbol files to this directory. Symbol files are just normal OCAD maps, usually without any objects.
 +
: '''File information'''
 +
Here you see the file information of the selected symbol file. If you create your own symbol files you can enter the file information by choosing '''Map Info''' from the '''Map''' menu.
 +
: '''Browse'''
 +
Click this button to copy the symbols for the new map from a map other than those listed. The Load colors and Symbols From file dialog box is displayed where you can choose the map.

Revision as of 10:56, 31 August 2011

Chapter 4: Create a New Map

OCAD provides predefined symbol sets to help you begin drawing your map immediately.

To create a new map:

  1. Select New in the File menu. The New Map dialog box appears.
  2. Select one of the predefined symbol sets from the Load colors and symbols from field and press OK.
hintYou can add, change or delete symbols in the symbol box at any time.
hintTo add your own set of symbols to the list of predefined symbol sets, simply copy the OCD file to the OCAD subdirectory "Symbol" (usually "C:\program files\OCAD\OCAD10\Symbol").
camera Creating a new map

Setting the Map Scale

Select Set Scale and Coordinate System from the Map menu. The Set Scale and Coordinate System dialog box appears.

  1. Enter a scale and click OK.

hint Do not use this menu to change the scale after entering the initial values. To increase or decrease the size of the map subsequently, use the Change Scale function in the Map menu.

  • Coordinate system

Choose here the desired coordinate system. UTM (Universal Transverse Mercator) is divided into 60 zones limited by meridians and defined worldwide.

  • Zone

Depending on selected coordinate system you must select a zone. If the coordinate system UTM is selected you can click the Find button to find the correct UTM zone. The dialog box Find UTM zone appears.

  • Map datum

This field displays the map datum for the desired coordinate system.

  • Ellipsoid

The field displays the ellipsoid from the map datum.

  • Location

The field displays the location, where the coordinate system can be used.

  • Remove

Press the button Remove to reset the coordinate system to 'undefined'.

  • Find UTM Zone

In this dialog box you can find the UTM zone based on geographical coordinate (degree of longitude and degree of latitude)

Example Coordinate from Baar (Switzerland): 47° 12 North (Latitude), 8° 31' East (Longitude). This is in the UTM zone 32 North.

  • Latitude

Enter in this field the degrees of latitude.

N (North): Click this button if the position is northern of the equator.
S (South): Click this button if the position is southern of the equator.
  • Longitude

Enter in this field the degrees of longitude.

W (West): Click this button if the position is western of Prime Meridian (London Greenwich).
E (East): Click this button if the position is eastern of Prime Meridian (London Greenwich).

Press the button OK to calculate the UTM zone. The UTM zone appears in the Coordinate system dialog box.


Georeference the Map

Before loading a georeferenced raster map, work with GPS data or import spatial base data, we recommend that you first georeference the map. You should contact your data supplier, national surveying office or cartographic institute to find out which coordinate system will best suit your needs.

Select SetScale and Coordinate System from the Map menu. The Set Scale and Coordinate System dialog box appears.

  1. Click Choose and then select a coordinate system. Depending on the selected coordinate system, it may be necessary to define a zone.
  2. In the Horizontal offset and Vertical offset fields, enter the coordinate values for the center of your map.
  3. The coordinate system can be rotated by entering a value in the Angle field (optional).
  4. In the Grid distance field, enter the desired value for the coordinate grid and click OK.
hint Enter the coordinate values for the center of your map in the horizontal and vertical offset fields. This is important since the drawing area of OCAD is limited to 4 x 4 m in the Standard Edition and 80 x 80 m in the Professional Edition. This option is used to ensure that imported spatial base data, georeferenced raster maps and GPS measurements do not lie outside the drawing area.


Map Type

Normal map: Choose this option if you want to start a new map.

Orienteering map

Course setting project for orienteering: Choose this option if you want to start a course setting project.
Load colors and symbols from

Choose a map from which the symbols should be copied to the new map. Click on a map to see the file information. Double click on the desired map to create a new map. The box lists all OCAD maps in the SYMBOL subdirectory. You may add your own symbol files to this directory. Symbol files are just normal OCAD maps, usually without any objects.

File information

Here you see the file information of the selected symbol file. If you create your own symbol files you can enter the file information by choosing Map Info from the Map menu.

Browse

Click this button to copy the symbols for the new map from a map other than those listed. The Load colors and Symbols From file dialog box is displayed where you can choose the map.