LiDAR Point Cloud Manager
You are not on the Wiki page of the newest OCAD Version. Click here to get there.
The OCAD 12 Wiki will not be updated anymore.
The LiDAR Point Cloud Manager analyzes the vegetation within the forest and creates a vegetation raster map. The analysis based on a ocdLas file created when importing las files in the DEM Import Wizard.
- 1 Load
- 2 Info
- 3 Show Frame
- 4 Close
- 5 Manage
- 6 Point Cloud
- 7 Profile
- 8 Raster Map
- 9 Statistics
This function loads an OCAD LAS file (*.ocdLas) and opens the LiDAR Point Cloud Manager.
The OCAD LAS file is a LiDAR point cloud in an OCAD internal file format created in the DEM Import Wizard. This file is optimized for fast access to the LiDAR points.
For more information about this file open the Information dialog.
This function shows information about the ocdLas file.
When moving the mouse cursor over the file name then the full file path appears.
This function shows a red rectangle with the extent of the loaded ocdLas file.
This function closes ocdLas file.
This function reopens the LiDAR Point Cloud Manager with the already loaded ocdLas file.
This functions shows the LiDAR point cloud as image according to the settings in filtering options.
It is the same extent as on the drawing area. The pixel size depends on the zoom level in the drawing area. When moving the cursor over the point cloud image the coordinate of the mouse cursor is shown in the status bar.
In the Filtering tab there are four different display options: Classification, Intensity, Height over ground and Vegetation density.
Display Option Classification
This option shows the classification of the LiDAR points. If more than one point is inside one cell then the point with the higher priority is shown. For example, the class Building has higher priority than Vegetation and Ground has the lowest priority.
Display Option Intensity
This option shows the intensity of the LiDAR points. Lower intensity is drawn with darker color. In this image the different types of vegetation (deciduous and coniferous forest) and the vegetation boundaries are visible.
Display Option Height Over Ground
This option shows the maximum height above ground for each cell. In this image high trees and vegetation boundaries can be detected.
Display Option Vegetation Density
This option shows the number of LiDAR points for each cell. Cells with more points are shown in darker red. Open areas have often less return points and appears therefore in lighter red.
Click the Save button to create a geo-referenced png file from the current point cloud image and load it as new background map. The file is automatically saved in the same folder as the ocd file.
A list with the different classifications is shown. The value in parentheses is the number of points for this class. In some cases it is recommended to uncheck the Overlap points. The overlapping points come from the different flight lines.
Click the Low vegetation button to choose only the Low vegetation points and set the Height above ground filter to 0.1 - 1.0 m.
Click the Medium vegetation button to choose only the Medium vegetation points and set the Height above ground filter to 1.0 - 3.0 m.
Choose which return types are shown. By default 'All returns' is chosen.
Height Above Ground
This function filters the points with the height above ground. To show only near-ground vegetation points move the left slider to 0.0 and the right to 3.0.
The profile shows the vegetation structure.
Draw a straight line in the drawing area inside the loaded ocdLas file and select the line object.
Choose the profile width and click the Show button. OCAD draws the profile according the filter settings in the Filtering tab.
This function creates an Orienteering base map with user-defined information about the near-ground vegetation. Near-ground means between ground and 3m above. When using this function the first time default values are set. The default values are optimized for Steinhauserwald in Switzerland and LiDAR data from Canton Zürich. The settings depend on the forest type and the LiDAR data.
The cell size is 1m and the kernel size 5x5 (5m x 5m).
The calculation based on the NDVD (Normalized Difference Vegetation Density). The thresholds for the undergrowth and the vegetation shall be between -1.0 and +1.0. The thresholds can be calculated with samples in the Statistics function. The meaning of the thresholds is visible in the image below.
The thresholds for the undergrowth is from 0.0m to 1.0m and for the vegetation from 0.0m to 3.0m
Area with no data are shown in red color if the value is set to True. Otherwise the cells are white and not specifiable from the forest cells. The filter option generalizes the raster map.
Click the Draw button to calculate and show the Orienteering base map. The map is drawn with the following colors:
Click the Save image button to create a geo-referenced png file and load it as new background map. The file is automatically saved in the same folder as the ocd file.
The example below shows the Orienteering base map (left) and the map from field work (right).
The statistics function can calculate the vegetation thresholds from samples.
OCAD uses Microsoft Excel for this function. If Excel is not installed the following error message appears.
The following steps are to do:
- Import Symbol from Template File
- Draw Samples
- Create Statistics
Import Symbol from Template File
Press the Shift key and click File -> Import. The file chooser opens in the Template subfolder of the OCAD program folder. Choose the Template Vegetation Samples.ocd file and click Open. In the Import OCAD Map dialog choose the option to Import all symbols and colors and at the top of the color table.
Click OK. The 6 imported symbols are in the symbol box.
The symbol are for the vegetation samples and have the following meaning:
Use these 6 symbols and draw samples for the expected vegetation. We recommend to draw totally more than 100 samples for the desired area.
Click the Create statistics button to create an Excel file. The file opens automatically if Excel is installed.
The 5 thresholds (marked in yellow color in the images bellow) can be inserted in the Raster map settings.