Difference between revisions of "Example Minor Road"

From OCAD 12 Wiki - English
Jump to: navigation, search
Line 10: Line 10:
 
c: '''yellow below''' for the framing<br>
 
c: '''yellow below''' for the framing<br>
  
It is important that the colors are in this order in the '''[[Colors|Color Table]]'''. The sidelines are cleared automatically in this case, when drawing an intersection, which looks as follows:
+
It is important that the colors are in this order in the '''[[Colors|Color Table]]'''. The sidelines are cleared automatically in this case, when drawing an intersection, which looks as follows:  
  
 +
[[File:MinorRoad_Intersection.PNG]]
  
 +
If you want to create an over- or underpass, you will have to create a new symbol. Duplicate the color for the sidelines from the original symbol, move it at the top of the '''[[Colors|Color Table]]''' and allocate it to the side line of the overpass symbol. Alternatively, you can just cut the line object at the position of the underpass using the [[File:Icon_Cut.PNG]] '''[[Cut]]''' tool.
  
 +
[[File:MinorRoad_Overpass.PNG]]
  
To create this symbol, start from an empty line symbol and then do the following steps:
+
==Parameters==
 +
To create this line symbol, enter the following parameters to a newly created line symbol:
  
In the Double Line page:
+
'''Double Line'''
# Choose Full lines for Mode.
+
* Mode: Full lines
# Enter the width of the yellow infill in Width.
+
* Width: 1.40 mm (This is the width of the filling, therefore also the distance between the sidelines)
# Check Fill.
+
* Fill color: On checked, yellow above (see color order at the top of this page)
# Choose the yellow color in Fill color. Note that this color must be below the color of the dashed line in the color table, otherwise it will cover the dashed line. In addition, it must be above the color of the sidelines, otherwise crossings are not cleared automatically.
+
* Left line color: black (see color order at the top of this page)
# Enter width and color in the box Left line.
+
* Left line width: 0.2 mm
# Enter width and color in the box Right line.
+
* Right line color: black (see color order at the top of this page)
 +
* Right line width: 0.2 mm
  
 
[[File:MinorRoadNormal_DoubleLine.PNG]]
 
[[File:MinorRoadNormal_DoubleLine.PNG]]
 +
 +
'''Framing'''<br>
 +
Framing is used to prevent small gaps between the filling and the sidelines of the line object.
 +
* Line color: yellow below (see color order at the top of this page)
 +
* Line width: 1.6 mm. In this case, the framing overlaps the sidelines by a half of their width.
  
  

Revision as of 12:02, 31 January 2013

MinorRoadNormal.PNG

Colors

The following colors are used for this symbol. Define and edit colors in the Colors dialog, which can be found in the Map menu.

Colors MinorRoad.PNG

a: yellow above for the infill of the double line
b: black for the sidelines
c: yellow below for the framing

It is important that the colors are in this order in the Color Table. The sidelines are cleared automatically in this case, when drawing an intersection, which looks as follows:

MinorRoad Intersection.PNG

If you want to create an over- or underpass, you will have to create a new symbol. Duplicate the color for the sidelines from the original symbol, move it at the top of the Color Table and allocate it to the side line of the overpass symbol. Alternatively, you can just cut the line object at the position of the underpass using the Icon Cut.PNG Cut tool.

MinorRoad Overpass.PNG

Parameters

To create this line symbol, enter the following parameters to a newly created line symbol:

Double Line

  • Mode: Full lines
  • Width: 1.40 mm (This is the width of the filling, therefore also the distance between the sidelines)
  • Fill color: On checked, yellow above (see color order at the top of this page)
  • Left line color: black (see color order at the top of this page)
  • Left line width: 0.2 mm
  • Right line color: black (see color order at the top of this page)
  • Right line width: 0.2 mm

MinorRoadNormal DoubleLine.PNG

Framing
Framing is used to prevent small gaps between the filling and the sidelines of the line object.

  • Line color: yellow below (see color order at the top of this page)
  • Line width: 1.6 mm. In this case, the framing overlaps the sidelines by a half of their width.


Download link: [Example_MinorRoad.ocd]


Back to Create a New Symbol