Difference between revisions of "Change to Polyline and Change to Bezier Curve"

From OCAD 12 Wiki - English
Jump to navigation Jump to search
(Created page with "==Change to Polyline== ==Change to Bezier Curve==")
 
Line 2: Line 2:
  
 
==Change to Bezier Curve==
 
==Change to Bezier Curve==
 +
 +
[[File:Icon_Icon_ChangeToBezierCurve.PNG]] To Curve button (Standard toolbar)
 +
 +
This command is activated when one or more objects are selected.
 +
 +
Choose this command to convert objects drawn in freehand mode to curves. All selected line and area objects are converted. If a hole inside an area object is selected, only the border of the hole is converted.
 +
 +
The setting of the Smoothing buttons is used for the conversion.

Revision as of 09:36, 1 December 2011

Change to Polyline

Change to Bezier Curve

File:Icon Icon ChangeToBezierCurve.PNG To Curve button (Standard toolbar)

This command is activated when one or more objects are selected.

Choose this command to convert objects drawn in freehand mode to curves. All selected line and area objects are converted. If a hole inside an area object is selected, only the border of the hole is converted.

The setting of the Smoothing buttons is used for the conversion.