OCAD 11 Dateiformat
Version: 2012-02-09
General
This is a description of the file format of OCAD 11 files.
Be aware that this is an internal format and may change in future versions.
Data types used
OCAD is written in 32-bit Delphi and this description uses the names for the data types as they appear in Delphi. However the same data types are available in other development systems like C++.
| Integer | 32-bit signed integer |
| SmallInt | 16-bit signed integer |
| Word | 16-bit unsigned integer |
| WordBool | 16-bit boolean |
| String[x] |
Widestring. The first byte contains the number of characters followed by the characters. The string is not zero-terminated. The maximum number of characters is x. It occupies x + 1 bytes in the file. |
| Double | 64-bit floating point number |
| TDPoly | A special data type (64-bit) used for all coordinates and text. It is defined as
TDPoly = record The lowest 8 Bits are used to mark special points: Marks for the x-coordinate: Marks for y-coordinate: The upper 24 bits contain the coordinate value measured in units of 0.01 mm. |
Note: all file positions are in bytes starting from the beginning of the file.
File Header
OCAD files start with a file header.
TFileHeader = record // size = 48 Byte OCADMark: SmallInt; // 3245 (hex 0cad) FileType: Byte; // file type (0: normal map, 1: course setting project, 8: file is saved in Server) FileStatus: Byte; // not used Version: SmallInt; // 11 Subversion: Byte; // number of subversion (0 for 11.0, 1 for 11.1 etc.) SubSubversion: Byte; // number of subsubversion (0 for 11.0.0, 1 for 11.0.1) FirstSymbolIndexBlk: integer; // file position of the first symbol index block ObjectIndexBlock: integer; // file position of the object index block -> TObjectIndexBlock // max 65536 * 256 objects OfflineSyncSerial: integer; // serialNumber for offline work in Server mode Res1: integer; // not used Res2: longint; // not used Res3: longint; // not used FirstStringIndexBlk: longint; // file position of the first string index block FileNamePos: integer; // file position of the file name, used for temporary files only FileNameSize: integer; // size of the file name, used for temporary files only Res4: integer; // not used
Symbols
Each Symbol Index Block contains the position of the next Symbol Index Block and the file position of 256 symbols.
TSymbolIndexBlock= record // Size: 1028 Bytes NextSymbolIndexBlock: integer; SymbolPosition: array[0..255] of integer; end;
Base Symbol
The different types of symbols are defined in different structures. There is an abstract type TBaseSym, which contains the fields common to all symbols types. It is used for programming reasons, but does not exist in real OCAD files.
TBaseSym = packed record
Size: integer; // Size of the symbol in bytes. This depends on the type. Coordinates following the symbol are included.
SymNum: integer; // Symbol number. This is 1000 times the symbol number.
// for example:
// 203.145 is stored as 203145
Otp: byte; // Object type
// 1: Point symbol
// 2: Line symbol or Line text symbol
// 3: Area symbol
// 4: Text symbol
// 6: Line text symbol
// 7: Rectangle symbol
Flags: byte; // 1: rotatable symbol (not oriented to north)
// 4: belongs to favorites
Selected: boolean; // Symbol is selected in the symbol box
Status: byte; // Status of the symbol
// 0: Normal
// 1: Protected
// 2: Hidden
// AND 16: selected
PreferredDrawingTool: byte; // Preferred drawing tool
// 0: off
// 1: Curve mode
// 2: Ellipse mode
// 3: Circle mode
// 4: Rectangular line mode
// 5: Rectangular area mode
// 6: Straight line mode
// 7: Freehand mode
// 8: Numeric mode
// 9: Stairway mode
CsMode: byte; // Course setting mode
// 0: not used for course setting
// 1: course symbol
// 2: control description symbol
CsObjType: byte; // Course setting object type
// 0: Start symbol (Point symbol)
// 1: Control symbol (Point symbol)
// 2: Finish symbol (Point symbol)
// 3: Marked route (Line symbol)
// 4: Control description symbol (Point symbol)
// 5: Course title (Text symbol)
// 6: Start number (Text symbol)
// 7: Relay variant (Text symbol)
// 8: Text block for control description (Text symbol)
CsCdFlags: byte; // Course setting control description flags
// a combination of the flags
// 64: available in column B
// 32: available in column C
// 16: available in column D
// 8: available in column E
// 4: available in column F
// 2: available in column G
// 1: available in column H
Extent: integer; // Extent how much the rendered symbols can reach outside the coordinates of an object with
// this symbol. For a point object it tells how far away from the coordinates of the object
// anything of the point symbol can appear
FilePos: integer; // Used internally. Value in the file is not defined.
notUsed1: Byte;
notUsed2: Byte;
nColors: SmallInt; // Number of colors of the symbol max. 14, -1: the number of colors is > 14
Colors: array[0..13] of SmallInt; // Colors of the symbol
Description: array[0..63] of char;// Description text
IconBits: array[0..483] of byte; // Each byte represents a pixel of the icon in a 256 color palette
SymbolTreeGroup: Array[0..63] of Word; // Group ID in the symbol tree, max 64 symbol groups
Point Symbol
Point symbols are stored with this structure:
TPointSym = packed record
Size: integer; // see TBaseSym
SymNum: integer; // see TBaseSym
Otp: byte; // 1
Flags: byte; // see TBaseSym
Selected: boolean; // see TBaseSym
Status: byte; // see TBaseSym
PreferredDrawingTool: byte; // see TBaseSym
CsMode: byte; // see TBaseSym
CsObjType: byte; // see TBaseSym
CsCDFlags: byte; // see TBaseSym
Extent: integer; // see TBaseSym
FilePos: integer; // see TBaseSym
Group: SmallInt; // see TBaseSym
nColors: SmallInt; // see TBaseSym
Colors: array[0..13] of SmallInt; // see TBaseSym
Description: array[0..63] of char; // see TBaseSym
IconBits: array[0..483] of byte; // see TBaseSym
SymbolTreeGroup: Array[0..63] of Word; // see TBaseSym
DataSize: word; // number of coordinates (each 8 bytes) which follow this structure, each object header
// counts as 2 Coordinates (16 bytes)
Reserved: SmallInt;
end;
After this structure follow the symbol elements which build that Point symbol. These symbol elements are stored in the following structure. Note that these symbol elements are stored in a different way than ordinary map objects.
TSymElt = record
stType: SmallInt; // type of the symbol element
// 1: line
// 2: area
// 3: circle
// 4: dot (filled circle)
stFlags: word; // Flags
// 1: line with round ends
stColor: SmallInt; // color of the object. This is the number which appears in
// the colors dialog box
stLineWidth: SmallInt; // line width for lines and circles unit 0.01 mm
stDiameter: SmallInt; // Diameter for circles and dots. The line width is included
// one time in this dimension for circles.
stnPoly: SmallInt; // number of coordinates
stRes1: SmallInt; // Not used
stRes2: SmallInt; // Not used
stPoly: array[0..32767] of TPoint; // coordinates of the symbol element
end;
If there are several objects, they just follow each other (only the coordinates used are stored). To determine the number of objects the DataSize variable must be used.
Line Symbol
Line symbols are stored in the following structure. In the explanation the terms used in the Line Symbol dialog box are shown.
TLineSym = packed record
Size: integer; // see TBaseSym
SymNum: integer; // see TBaseSym
Otp: byte; // 2
Flags: byte; // see TBaseSym
Selected: boolean; // see TBaseSym
Status: byte; // see TBaseSym
PreferredDrawingTool: byte; // see TBaseSym
CsMode: byte; // see TBaseSym
CsObjType: byte; // see TBaseSym
CsCDFlags: byte; // see TBaseSym
Extent: integer; // see TBaseSym
FilePos: integer; // see TBaseSym
Group: SmallInt; // see TBaseSym
nColors: SmallInt; // see TBaseSym
Colors: array[0..13] of SmallInt; // see TBaseSym
Description: array[0..63] of char; // see TBaseSym
IconBits: array[0..483] of byte; // see TBaseSym
SymbolTreeGroup: Array[0..63] of Word; // see TBaseSym
LineColor: SmallInt; // Line color
LineWidth: SmallInt; // Line width
LineStyle: SmallInt; // Line style
// 0: bevel joins/flat caps
// 1: round joins/round caps
// 4: miter joins/flat caps
DistFromStart: SmallInt; // Distance from start
DistToEnd: SmallInt; // Distance to the end
MainLength: SmallInt; // Main length a
EndLength: SmallInt; // End length b
MainGap: SmallInt; // Main gap C
SecGap: SmallInt; // Gap D
EndGap: SmallInt; // Gap E
MinSym: SmallInt; // -1: at least 0 gaps/symbols
// 0: at least 1 gap/symbol
// 1: at least 2 gaps/symbols
// etc.
nPrimSym: SmallInt; // No. of symbols
PrimSymDist: SmallInt; // Distance
DblMode: word; // Mode (Double line page)
DblFlags: word; // Double line flags
// 1: Fill color on
// 2: Background color on
DblFillColor: SmallInt; // Fill color
DblLeftColor: SmallInt; // Left line/Color
DblRightColor: SmallInt; // Right line/Color
DblWidth: SmallInt; // Width
DblLeftWidth: SmallInt; // Left line/Line width
DblRightWidth: SmallInt; // Right line/Line width
DblLength: SmallInt; // Dashed/Distance a
DblGap: SmallInt; // Dashed/Gap
DblBackgroundColor: SmallInt; // Reserved
DblRes: array[0..1] of SmallInt; // Reserved
DecMode: word; // Decrease mode
// 0: off
// 1: decreasing towards the end
// 2: decreasing towards both ends
DecLast: SmallInt; // Last symbol
DecRes: SmallInt; // Reserved
FrColor: SmallInt; // Color of the framing line
FrWidth: SmallInt; // Line width of the framing line
FrStyle: SmallInt; // Line style of the framing line
// 0: bevel joins/flat caps
// 1: round joins/round caps
// 4: miter joins/flat caps
// PointedEnd := LineStyle and 2 > 0;
PrimDSize: word; // number or coordinates (8 bytes) for the Main symbol A which follow this structure.
// Each symbol header counts as 2 coordinates (16 bytes).
SecDSize: word; // number or coordinates (8 bytes) for the Secondary symbol which follow the Main symbol A
// Each symbol header counts as 2 coordinates (16 bytes).
CornerDSize: word; // number or coordinates (8 bytes) for the Corner symbol which follow the Secondary symbol
// Each symbol header counts as 2 coordinates (16 bytes).
StartDSize: word; // number or coordinates (8 bytes) for the Start symbol C which follow the Corner symbol
// Each symbol header counts as 2 coordinates (16 bytes).
EndDSize: word; // number or coordinates (8 bytes) for the End symbol D which follow the Start symbol C
// Each symbol header counts as 2 coordinates (16 bytes).
UseSymbolFlags: Byte;
Reserved: Byte;
end;
Area Symbol
Area symbols are stored in the following structure. In the explanation the terms used in the Area Symbol dialog box are shown. The unit of all dimensions is 0.01 mm.
TAreaSym = packed record
Size: integer; // see TBaseSym
SymNum: integer; // see TBaseSym
Otp: byte; // 3
Flags: byte; // see TBaseSym
Selected: boolean; // see TBaseSym
Status: byte; // see TBaseSym
PreferredDrawingTool: byte; // see TBaseSym
CsMode: byte; // see TBaseSym
CsObjType: byte; // see TBaseSym
CsCDFlags: byte; // see TBaseSym
Extent: integer; // see TBaseSym
FilePos: integer; // see TBaseSym
Group: SmallInt; // see TBaseSym
nColors: SmallInt; // see TBaseSym
Colors: array[0..13] of SmallInt; // see TBaseSym
Description: array[0..63] of char; // see TBaseSym
IconBits: array[0..483] of byte; // see TBaseSym
SymbolTreeGroup: Array[0..63] of Word; // see TBaseSym
BorderSym: integer; // Symbol for border line activated if BorderOn is true
FillColor: SmallInt; // Fill color activated if FillOn is true
HatchMode: SmallInt; // Hatch mode
// 0: None
// 1: Single hatch
// 2: Cross hatch
HatchColor: SmallInt; // Color (Hatch page)
HatchLineWidth: SmallInt; // Line width
HatchDist: SmallInt; // Distance
HatchAngle1: SmallInt; // Angle 1
HatchAngle2: SmallInt; // Angle 2
FillOn: boolean; // Fill is activated
BorderOn: boolean; // Border line is activated
StructMode: SmallInt; // Structure
// 0: None
// 1: aligned rows
// 2: shifted rows
StructWidth: SmallInt; // Width
StructHeight: SmallInt; // Height
StructAngle: SmallInt; // Angle
StructRes: SmallInt; // Reserved
DataSize: word; // number of coordinates (each 8 bytes) which follow this structure, each object header
// counts as 2 Coordinates (16 bytes)
end;
Text Symbol
Text symbols are stored in the following structure. In the explanation the terms used in the Text Symbol dialog box are shown. The unit of all dimensions is 0.01 mm, except for the font sizes which are measured in 0.1 typographical points.
TTextSym = packed record
Size: integer; // see TBaseSym
SymNum: integer; // see TBaseSym
Otp: byte; // 4
Flags: byte; // see TBaseSym
Selected: boolean; // see TBaseSym
Status: byte; // see TBaseSym
PreferredDrawingTool: byte; // see TBaseSym
CsMode: byte; // see TBaseSym
CsObjType: byte; // see TBaseSym
CsCDFlags: byte; // see TBaseSym
Extent: integer; // see TBaseSym
FilePos: integer; // see TBaseSym
Group: SmallInt; // see TBaseSym
nColors: SmallInt; // see TBaseSym
Colors: array[0..13] of SmallInt; // see TBaseSym
Description: array[0..63] of char; // see TBaseSym
IconBits: array[0..483] of byte; // see TBaseSym
SymbolTreeGroup: Array[0..63] of Word; // see TBaseSym
FontName: string[31]; // TrueType font
FontColor: SmallInt; // Color
FontSize: SmallInt; // 10 times the size in pt
Weight: SmallInt; // Bold as used in the Windows GDI
// 400: normal
// 700: bold
Italic: boolean; // true if Italic is checked
Res1: byte; // not used
CharSpace: SmallInt; // Char. spacing
WordSpace: SmallInt; // Word spacing
Alignment: SmallInt; // Alignment
// 0: Bottom Left
// 1: Bottom Center
// 2: Bottom Right
// 3: Bottom Justified
// 4: Middle Left
// 5: Middle Center
// 6: Middle Right
// 7: only in LText!
// 8: Top Left
// 9: Top Center
// 10: Top Right
// 11: only in LText!
LineSpace: SmallInt; // Line spacing
ParaSpace: SmallInt; // Space after Paragraph
IndentFirst: SmallInt; // Indent first line
IndentOther: SmallInt; // Indent other lines
nTabs: SmallInt; // number of tabulators for text symbol
Tabs: array[0..31] of longint; // Tabulators
LBOn: wordbool; // true if Line below On is checked
LBColor: SmallInt; // Line color (Line below)
LBWidth: SmallInt; // Line width (Line below)
LBDist: SmallInt; // Distance from text
Res2: SmallInt;
FrMode: byte; // Framing mode
// 0: no framing
// 1: shadow framing
// 2: line framing
// 3: rectangle framing
FrLineStyle: byte; // Framing line style
// 0: default OCAD 8 Miter
// 2: ps_Join_Bevel
// 1: ps_Join_Round
// 4: ps_Join_Miter
PointSymOn: boolean; // Point symbol is activated
PointSymNumber: integer; // Point symbol for text symbol activated if PointSymOn is true
Res3: string[18]; // not used
FrLeft: SmallInt; // Left border for rectangle framing
FrBottom: SmallInt; // Bottom border for rectangle framing
FrRight: SmallInt; // Right border for rectangle framing
FrTop: SmallInt; // Top border for rectangle framing
FrColor: SmallInt; // Framing color
FrWidth: SmallInt; // Framing width for line framing
Res4: SmallInt; // not used
Res5: wordbool; // not used
FrOfX: SmallInt; // Horizontal offset for shadow framing
FrOfY: SmallInt; // Vertical offset for shadow framing
end;
Line Text Symbol
Line Text symbols are stored in the following structure. In the explanation the terms used in the Line Text Symbol dialog box are shown. The unit of all dimensions is 0.01 mm, except for the font sizes which are measured in 0.1 typographical points.
TLTextSym = packed record
Size: integer; // see TBaseSym
SymNum: integer; // see TBaseSym
Otp: byte; // 6
Flags: byte; // see TBaseSym
Selected: boolean; // see TBaseSym
Status: byte; // see TBaseSym
PreferredDrawingTool: byte; // see TBaseSym
CsMode: byte; // see TBaseSym
CsObjType: byte; // see TBaseSym
CsCDFlags: byte; // see TBaseSym
Extent: integer; // see TBaseSym
FilePos: integer; // see TBaseSym
Group: SmallInt; // see TBaseSym
nColors: SmallInt; // see TBaseSym
Colors: array[0..13] of SmallInt; // see TBaseSym
Description: array[0..63] of char; // see TBaseSym
IconBits: array[0..483] of byte; // see TBaseSym
SymbolTreeGroup: Array[0..63] of Word; // see TBaseSym
FontName: string[31]; // TrueType font
FontColor: SmallInt; // Color
FontSize: SmallInt; // 10 times the value entered in Size
Weight: SmallInt; // Bold as used in the Windows GDI
// 400: normal
// 700: bold
Italic: boolean; // true if Italic is checked
Res1: byte; // not used
CharSpace: SmallInt; // Char. spacing
WordSpace: SmallInt; // Word spacing
Alignment: SmallInt; // Alignment --> constant.pas
// 0: Bottom Left
// 1: Bottom Center
// 2: Bottom Right
// 3: Bottom All line
// 4: Middle Left
// 5: Middle Center
// 6: Middle Right
// 7: Middle All line
// 8: Top Left
// 9: Top Center
// 10: Top Right
// 11: Top All line
FrMode: byte; // Framing mode
// 0: no framing
// 1: shadow framing
// 2: line framing
FrLineStyle: byte; // Framing line style
// 0: default OCAD 8 and 9.0 Miter
// 2: ps_Join_Bevel
// 1: ps_Join_Round
// 4: ps_Join_Miter
Res2: string[31]; // not used
FrColor: SmallInt; // Framing color
FrWidth: SmallInt; // Framing width for line framing
Res3: SmallInt; // not used
Res4: wordbool; // not used
FrOfX: SmallInt; // Horizontal offset for shadow framing
FrOfY: SmallInt; // Vertical offset for shadow framing
end;
Rectangle Symbol
Rectangle symbols are stored in the following structure. In the explanation the terms used in the Rectangle Symbol dialog box are shown. The unit of all dimensions is 0.01 mm.
TRectSym = packed record
Size: integer; // see TBaseSym
SymNum: integer; // see TBaseSym
Otp: byte; // 7
Flags: byte; // see TBaseSym
Selected: boolean; // see TBaseSym
Status: byte; // see TBaseSym
PreferredDrawingTool: byte; // see TBaseSym
CsMode: byte; // see TBaseSym
CsObjType: byte; // see TBaseSym
CsCDFlags: byte; // see TBaseSym
Extent: integer; // see TBaseSym
FilePos: integer; // see TBaseSym
Group: SmallInt; // see TBaseSym
nColors: SmallInt; // see TBaseSym
Colors: array[0..13] of SmallInt; // see TBaseSym
Description: array[0..63] of char; // see TBaseSym
IconBits: array[0..483] of byte; // see TBaseSym
SymbolTreeGroup: Array[0..63] of Word; // see TBaseSym
LineColor: SmallInt; // Line color
LineWidth: SmallInt; // Line width
Radius: SmallInt; // Corner radius
GridFlags: word; // A combination of the flags
// 1: Grid On
// 2: Numbered from the bottom
CellWidth: SmallInt; // Cell width
CellHeight: SmallInt; // Cell height
ResGridLineColor: SmallInt; // Reserved
ResGridLineWidth: SmallInt; // Reserved
UnnumCells: SmallInt; // Unnumbered Cells
UnnumText: string[3]; // Text in unnumbered Cells
Res1: SmallInt; // not used
Res2: string[31]; // not used
ResFontColor: SmallInt; // Reserved
FontSize: SmallInt; // font size
Res3: SmallInt; // not used
Res4: wordbool; // not used
Res5: SmallInt; // not used
Res6: SmallInt; // not used
end;
Objects
Each Object Index Block contains the position of the next Object Index Block and the file position and other information of 256 objects.
Object Index Block
TObjectIndexBlock = record // Size: 10296 Bytes NextObjectIndexBlock: integer; Table: array[0..255] of TObjectIndex; end;
TObjectIndex = record // Size: 40 byte
OCAD Objets
TObjectIndex = packed record // Size: 40 Byte rc: LRect; // bounding box (lower left and upper right, all flag bits are set to 0
Parameter Strings
The Parameter Strings contain all the information about the setup structure, background maps,course setting and database connection.
Similar to the symbols and objects there are String Index Blocks which contain the basic information for 256 Parameter Strings and the file position of the strings.
TStringIndexBlock contains the basic information for 256 strings
TStringIndexBlock = record NextIndexBlock: integer; // file position of the next StringIndexBlock, 0 if this is the last StringIndexBlock Table: array[0..255] of TStringIndex; end;
TStIndex contains the basic information for 1 string:
TStringIndex = packed record Pos: integer; // file position of string Len: integer; // length reversed for the string RecType: integer; // string typ number, if < 0 then deleted string ObjIndex: integer; // number of the object end;
StringIndexBlk in the FileHeader points to the first StringIndexBlock.
The strings (null terminated) have the following structure:
- first field: all characters until the first tab (character 9). The first field can be missing (the string starts with a tab).
- tab (character 9)
- code: this is the first character after the tab
- value: all characters until the next tab
- tab
- code
- value
- ...
Some of String Types (number < 1000) may have multiple instances of the same type. They have to be stored as lists.
si_CsObject = 1; // First = Code // Y = Type (s = start, c = control, m = marked route, f = finish, d = control description, n = course name, u = start number // v = variation code, t = text block) // b = Symbol for field B (Trail-O, Macr-O, Micr-O) // c = Symbol for field C // d = Symbol for field D // e = Symbol for field E // f = Symbol for field F // g = Symbol for field G // h = Symbol for field H // m = f: Funnel tapes // o = t: Text control description object; '': iof symbols // p = Control description corner: 0=top left; 1=bottom left // s = Size information // t = Text for text description and text block // u = elevation user [double] // v = is elevation user used [boolean]
si_Course = 2; // First = CourseName // C = Climb // E = Extra distance // F = from start number (auto created class) // H = ClassName for control description (imported from event software) // K = Combination (imported from event software) // M = Map file // R = number of runners/teams (auto created class) // S = Map scale // T = to start number (auto created class) // Y = Course type (s = relay, o = one-man relay) // L = Number of Legs (used for relay and one-man relay) // s = start // c = control // m = marked route // k = mandatory crossing point // w = mandatory passage through out of bounds area // g = map change // f = finish // l = leg variation starts // b = branch of a leg variation starts // p = end of a leg variation // r = relay variation starts // v = branch of a relay variation starts // q = end of a relay variation // e = used internally only (control number) // i = used internally only (back to begin of variation) // j = used internally only (line to end of variation) // n = course name object // u = start number object // t = text block for control description // o = other object
si_CsClass = 3; // First = class name // c = Course name // f = FromNumber (relay) // r = Number of runners // t = ToNumber (relay)
si_DataSet = 4; // First = dataset name // e = dBase file // d = ODBC data source // u = database user name (encrypted) // p = database password (encrypted) // t = table // k = key field // y = symbol field // x = text field // f = size field // l = length unit // a = area unit // c = decimals // h = easting field // v = northing field // g = angle field
si_DbObject = 5; // First = key // d = Dataset
si_OimFile = 6;
si_PrevObj = 7; // First = course name; // o = object // d = description (eg object name) // f = from, startpoint of line // t = to, end point of line
si_BackgroundMap = 8; // a = angle omega [double, 8] // b = angle phi [double, 8] // d = dim // o = render with spot colors (only for raster background maps) // p = assigned to spot color (only for raster background maps) // q = subtract from spot color (0 = normal, 1 = subtract) // r = visible in background favorites (0 = hidden, 1 = visible) // s = visible in normal, spot color and draft mode (0 = hidden, 1 = visible) // t = transparent // x = offset x [double, 6] // y = offset y [double, 6] // u = pixel size x [double, 10] // v = pixel size y [double, 10] // i = is infrared image (0=undefined, 1=32bit-infrared, 2=32bit RGB) // m = is WMS online background map // k = WMS server name // l = WMS layer name // n = WMS layer scale range
si_Color = 9; // First = name // n = number // c = cyan // m = magenta // y = yellow // k = black // o = overprint // t = transparency // s = spot color separation name // p = percentage in the spot color separation
si_SpotColor = 10; // First = name // v = visible // n = number // f = frequency (lpi) // a = angle // c = cyan // m = magenta // y = yellow // k = black
si_FileInfo_OCAD10 = 11; //replace in OCAD 11 by si_MapNotes = 1061
si_Zoom = 12; // x = offset x // y = offset y // z = zoom
si_ImpLayer = 13; // First = Name // n = layer number
si_OimFind = 14; // First = Name // c = Condition // d = Dataset // f = From zoom // h = Hint field // n = Name field // o = Hotspot type // p = Pointer type // s = Show hotspots // l = List names(in listbox) // t = To zoom // u = URL field // x = Prefix // y = Postfix // z = Target // r = Pointer color red // g = Pointer color green // b = Pointer color blue // R = Hotspot color red // G = Hotspot color green // B = Hotspot color blue
si_SymTree = 15; // First = name // g = group id // v = visible // e = is node expanded (boolean) // i = Level in Tree
si_CryptInfo = 16; // Description is in TCryptInfo class
si_Bookmark = 18; // First = bookmark name // d = description // x = offset x // y = offset y // z = zoom
si_Selection = 19; // First = selection name // n = number // o = object ids
si_GpsAdjustPar = 21; // m = Gps adjusted mode 1=true; 0=false // n = number of GPS adjustment points --> GpsAdjustPoint // a = GPS angle
si_GpsAdjustPoints = 22; // First = name // x = offset x on map // y = offset y on map // h = Longitude // v = Latitude // c = checked (true/false)
si_Group = 23; // First = Name // n = group number
si_RecentDocs = 24; // First = file name
si_CsAutoCdAllocationTable = 25; // First = Map symbol number (STRING) // a = Control description symbol 0 (STRING) // b = Control description symbol 1 (STRING) // c = Control description symbol 2 (STRING) // d = Control description symbol 3 (STRING) // e = Control description symbol 4 (STRING) // f = Control description symbol 5 (STRING) // g = Control description dragged direction (STRING) // h = Control description click (STRING)
si_RulerGuidesList = 26; // h = horizontal guide (0=vertical, 1=horizontal) // c = x or y ccordiante (INTEGER, OCAD coordinate)
si_LayoutObjects = 27; // First = path for images; description for vector objects // r = type: raster image object = 1; vector object = 0 // s = visible (0 = hidden, 1 = visible) // a = angle omega // b = angle phi // d = dim // t = transparent // x = offset x // y = offset y // u = pixel size x // v = pixel size y // i = is infrared image (0=undefined, 1=32bit-infrared, 2=32bit RGB) // n = ActObjectIndex
si_LayoutFontAttributes = 28; // First = font name // s = font size
si_PrintAndExportRectangleList = 29; // First = Name // b = bottom [integer, ocad unit] // l = left [integer, ocad unit] // r = right [integer, ocad unit] // t = top [integer, ocad unit]
si_DisplayPar = 1024; // f = Show symbol favorites // g = selected symbol group // s = selected symbol // t = Show symbol tree // h = horizontal splitter (pixel from top) // v = vertical splitter (pixel from right) // b = horizontal splitter for background map panel (pixel from top) // i = display mode for unsymbolized objects (0=normal, 2=hidden) // j = display mode for graphic objects (0=normal, 2=hidden) // k = display mode for image objects (0=normal, 1=protect, 2=hidden) // l = display mode for layout objects (0=normal, 2=hidden)
si_OimPar = 1025; // First = OpenLayers // a = Antialiasing [boolean] // b = Border width [integer] // A = Map Title [string] // C = Map Subtitle [string] // E = Editlayer enable [boolean] // F = Searchbox enable [boolean] // m = Do not create tiles [boolean] // H = Show layer selector [boolean] // I = Show overview map [boolean] // i = Show overview map maximized [ boolean] // K = Show mouse coordinates [boolean] // P = Show Permalink [boolean] // J = Font size in pt [integer] // L = Subheader fontsize in pt [integer] // R = Site background color red [integer: 0..255] // G = Site background color green [integer: 0..255] // B = Site background color blue [integer: 0..255] // M = Border color [string] as hex e.g.: 00FF00 must be exact 6 values // N = Header font color [string] as hex exapmle see border color // O = Header background color [string] as hex // T = Subheader font color [string] as hex // Q = Subheader background color [string] as hex // X = Filename of last Safeplace [string] // f = Generate map from zoomlevel [integer] // t = Generate map to zoomlevel [integer]
si_PrintPar = 1026; // a = print scale // l = landscape // c = print (0 = color map, 1 = spot color separation) // g = print screen grid // d = screen grid color // i = intensity // w = additional width for lines and dots // r = Range (0 entire map, 1 part of map, 2 one page) // L = part of map left // B = part of map bottom // R = part of map right // T = part of map top // x = horizontal overlap // y = vertical overlap // b = print black (course setting only) // m = Mirror (course setting only) // s = HorScal (course setting only) // t = VerScal (course setting only) // p = reference point for part of map setup ([0..8])
si_CdPrintPar = 1027; // t = Title // s = Size
si_DefaultBackgroundMapsPar = 1028; // s = default scale
si_EpsPar = 1029; // r = EPS resolution
si_ViewPar = 1030; // b = draft mode IGN for ocad-map [int: 0..100] // c = draft mode IGN background maps [int: 0..100] // d = hidden background maps // m = draft mode for ocad-map [int: 0..100] // t = draft mode background maps [int: 0..100] // v = view mode (0=normal, 1=spot colors, 2=draft, 3=draft IGN) // x = offset x // y = offset y // z = zoom // h = hatch areas (0 = normal, 1 = hatched) // k = keyline mode (0 = normal, 1 = keyline) // i = map visible // l = hidden layout // OLD: a, p, s
si_CoursePar = 1031; // a = create classes automatically // b = background for control descriptions // c = numbering (0 = number, 1 = number and code, 2 = code only) // d = control descriptions for all controls // e = event title // f = control frequencies (0 = number and frequencies, 1 = frequencies only) // h = thicker horizonal line in control description (0=not, 1=every third, 2=every fourth) // i = maximal length of control description (number of rows) // l = distance to connection line // n = distance to number // o = lock for cs object positions (0=unlocked, 1=locked) (BOOL) // p = fullstop after control number // q = lock for cs courses (0=unlocked, 1=locked) (BOOL) // r = export relay combinations // s = cell size control description // t = course title // w = write number of start to control description
si_TiffPar = 1032; // c = compression (1 = no compression, 2 = CCITT, 4 = FaxG4, 5 = LZW)
si_TilesPar = 1033; // w = width // h = height
si_DbPar = 1034; // d = dataset // l = last code // n = create new record
si_ExportPar = 1035; // First = Format (AI, BMP, DXF, GIF, JPEG, OIM, PDF, Shape, SVG, TIFF) // a = Anti-Aliasing // b = combined spot colors // c = color format (0 = 24 bit, 1 = 256 colors, 2 = grayscale, 3 = 1 bit, 4 = halftone screen) // g = Raster (geo-referenced)export mode 0 = resolution, 1 = pixel size // i = pixel size (in Meter) // l = color correction (0 off, 1 on) // o = spot color separations (0=CMYK, 1=spot colors) // p = part of map (0 off, 1 on) // q = JPEG quality (INTEGER, [0..100]) // r = resolution // s = scale // t = tiles (0 off, 1 on) // w = world file // z = compressed svg file (0 off, 1 on)
si_CsExpTextPar = 1037; // C = classes (0 = courses, 1 = classes) // L = export climbing (0 = off, 1 = on)
si_CsExpStatPar = 1038; // C = classes (0 = courses, 1 = classes) // a = separator 1 // b = tab 1 // c = separator 2 // d = tab 2 // e = separator 3 // f = tab 3
si_ScalePar = 1039; // a = real world angle // b = additional local horizontal offset in m // c = additional local vertical offset in m // d = grid distance for real world in m [double, 6] // g = grid distance for paper coordinates in mm [double, 6] // i = grid and zone // m = map scale // r = real world cord (0 = paper, 1 = real world) // x = real world offset x // y = real world offset y
si_DbCreateObjPar = 1040; // c = condition // d = dataset // t = text field // m = unit of measure (m = m, km = km) // u = horizontal offset // v = vertical offset // x = horizontal field // y = vertical field
si_SelectedSpotColors = 1041;
si_XmlScriptPar = 1042; // f = last used file
si_BackupPar = 1043; // p = path
si_ExportPartOfMapPar = 1044; // b = boundary (0=rectangular boundries, 1=selected object for boundries) // s = export with selected object (0=false, 1=true) // r = reference point for part of map setup ([0..8]) // l = export links to databases (0=false, 1=true)
si_DemPar = 1045; // First = file // l = DEM loaded // f = Frame visible // i = last used import folder
si_GpsImportFilePar = 1046; // a = assign symbol (true/false) // t = symbol number for tracks // w = symbol number for waypoint
si_ImportXyz = 1047; // n = point symbol number
si_RelayCoursesDialog = 1048; // First = last exported or printed course (STRING) // l = legs (-1=All) (INT) // p = variants selected (0=start numbers, 1=variants) (BOOL) // s = start number (-1=All) (STRING) // v = variants index (-1=All) (INT)
si_CsAutoControlDescription = 1049; // First = ocd background map file name for auto control description (STRING) // a = auto control description (0=off, 1=off) (BOOL)
si_GpxExportPar = 1050; // First = description // a = author // k = keywords // r = routes or tracks (true = routes, false = tracks)
si_KmlInfo = 1051; // Description in ExpKml.pas
si_GpsRouteAnalyzer = 1052; // First = Project file
si_CoordinateSystemPar = 1053; //First = description // d = datumId // e = ellipsoidId // x = ellipsoid axis // t = ellipsoid flattening // r = projectionId // m = false easting // n = false northing // f = scale factor // c = central meridian // o = longitude of origin // a = latitude of origin // s = standard parallel 1 // p = standard parallel 2 // l = location // z = azimuth // g = EPSG code
si_GraticulePar = 1054; // h = horizontal distance // v = vertical distance // l = symbol number for grid lines // t = symbol number for text labels
si_GraticuleNameIndexPar = 1055; // s = style // x = index origin of longitude // y = index origin of latitude // h = horizontal distance // v = vertical distance
si_KmzExportPar = 1056; // first = Name: string // t = Tiles: integer (0 = no tiles, 1 = Garmin Custom Maps optimized, 2 = tiles)
si_LegendPar = 1057; // u = show only Used Symbols // v = show also hidden symbols // h = icon Height // w = icon Height // y = line Spacing100 // p = show Point Symbols // l = show Point Symbols // a = show Point Symbols // r = show Point Symbols // t = show Point Symbols // z = show Point Symbols // d = description Symbol // s = show Symbol Number
si_RulersPar = 1058; // no First // s = show (0=false, 1=true) // x = ruler origin x (INTEGER, OCAD coordinate) // y = ruler origin y (INTEGER, OCAD coordinate) // m = move also ruler guides (0=false, 1=true)
si_RulerGuidesPar = 1059; // no First // s = show (0=false, 1=true) // l = lock (0=false, 1=true)
si_DbOptions = 1060; // c = create record when cutting object (0=false, 1=true) // d = delete record when deleting object (0=false, 1=true)
si_MapNotes = 1061; // First = text
si_SendFileByEmail = 1062; // First = subject // t = to // d = add loaded DEM (0=false, 1=true) // a = add loaded databases (0=false, 1=true) // b = add loaded databases (0=false, 1=true) // l = add loaded databases (0=false, 1=true)
si_MapGridPar = 1063; // a = angle // e = easting offset // n = northing offset // h = horizontal (easting) distance // v = vertical (northing) distance // x = create easting grid lines // y = create northing grid lines // j = create vertices at grid junctions // l = symbol number for grid lines // t = symbol number for text labels
si_DemSlopePar = 1064; // m = Method: 0 = continuous; 1 = black/white // c = Slope for black pixels in continuous method // b = Slope for black pixels in black/white method // l = load slope map as background map
si_DemProfilePar = 1065; // First = profile template path // a = scale option (0=auto-scale, 1=used defined scale) // c = scale // d = distance unit (0=km, 1=m) // g = show grid (0=false, 1=true) // m = time unit (0=h:mm) // r = round time steps (0=no round, 5=round to 5 minutes, 10=round to 10 minutes) // t = show text at the bottom of the profile (0=false, 1=true) // x = length resolution // z = elevation resolution // k = elevation factor
si_DemHillshadingPar = 1066; // m = Method: 0 = simple; 1 = combined // a = azimut // d = declination // e = exaggeration // l = load hillshading as background map
si_DemHypsometricMapPar = 1067; // m = Method: 0 = grayscale; 1 = colored // l = load hillshading as background map
si_DemClassifyVegetationPar = 1068; // m = Method: 0 = grayscale; 1 = colored // l = load hillshading as background map
si_ShapeExportPar = 1069; // a = item 'area objects' selected (0=false, 1=true) // c = create projection file // d = dataset ['all' = All Objects or name of dataset] // l = item 'line objects' selected (0=false, 1=true) // p = item 'point objects' selected (0=false, 1=true) // r = replace word wrap by tilde (0=false, 1=true) // t = item 'text objects' selected (0=false, 1=true) // u = UTF-8 Encoding (0=false, 1=true)
si_DxfExportPar = 1070; // a = convert text from ANSI to OEM (0=false, 1=true) // o = convert text from OEM to Unicode (0=false, 1=true) // s = only objects with selected symbol (0=false, 1=true) // l = add symbol description in DXF layer name (0=false, 1=true) // e = export OCAD Curves as DXF splines (0=false, 1=true) // c = coordinates (0=m, 1=mm)
si_DemImportLasPar = 1071; // u = unclassified // g = ground // l = low vegetation // m = mean vegetation // h = high vegetation // b = buildings // w = water class // o = other class // r = Return option