Beispiel Eisenbahn

Aus OCAD 11 Wiki - Deutsch
Version vom 31. Oktober 2011, 16:07 Uhr von Admin (Diskussion | Beiträge) (Created page with "File:DashedFraming.PNG To create this symbol, start from an empty line symbol and then do the following steps: In the Main Line page: # Enter Line color and Line width. [[...")

(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Wechseln zu: Navigation, Suche

DashedFraming.PNG

To create this symbol, start from an empty line symbol and then do the following steps:

In the Main Line page:

  1. Enter Line color and Line width.

DashedFraming MainLine.PNG

In Distances page:

  1. Enter the maximum distance between the lines as Main length a.
  2. Enter the length of the gap in the center line in Main gap C.

DashedFraming Distances.PNG

In Double line page:

  1. Choose Full lines for Mode.
  2. Enter the width of the yellow infill in Width.

DashedFraming DoubleLine.PNG

In the Framing page:

  1. Choose the black color in Line color. Note that this color must be below the color of the dashed line in the color table, otherwise it will cover the dashed line.
  2. Enter the width of the yellow background in Line width.

DashedFraming Framing.PNG


Back to Create a New Symbol