Bahnen drucken: Unterschied zwischen den Versionen

Aus OCAD 11 Wiki - Deutsch
Zur Navigation springen Zur Suche springen
Keine Bearbeitungszusammenfassung
Keine Bearbeitungszusammenfassung
Zeile 2: Zeile 2:
''(This function is only available in course setting projects!)''
''(This function is only available in course setting projects!)''


Choose the '''Courses''' command in the '''Print''' submenu of the '''Course Setting''' menu to print courses.


Choose this command for printing courses.
The '''Print Courses''' box appears on the right side of the screen. Adjust the settings which can be made in the '''Printer''', '''Page handling''', '''Scale''' and '''Options''' part with help of the '''[[Printing Maps]]''' page. The differences of the '''Print Courses''' to the '''Print''' box are that there is no '''Color''' field but in addition a '''Select Courses/Classes''' field. The '''Print map size''' field has the extra option '''Course only on already printed map'''.


=== Print Course Only ===
Choose the '''Course only on already printed map''' option from the '''Print map size''' part of the '''Print Courses''' box. Click the [[File:Setup.JPG]] '''Setup''' button.


'''Printer'''
The '''Course Only''' dialog appears:<br />
Select the printer to print the map. In the box you can select one of the installed Windows printer drivers. Click the Properties button to change printing options.
Adjust bottom left corner of the print range:
* '''Intervall''': Set the interval step for 1 click on an adjustment button ('''Left''', '''Up''', '''Right''', '''Down''').
* '''Left''', '''Up''', '''Right''', '''Down''': Click on the adjustment buttons '''Left''', '''Up''', '''Right''' or '''Down''' to adjust the print range in relation to the map. The left/right and up/down adjustment is displayed on the left side of the dialog box, in the '''Adjustment''' part.
* '''Horizontal Scaling, Vertical Scaling''': Enter here a scaling to adjust the course to an already printed map. Normally you will need here only very small corrections (99...101%) caused by the shrinking of the paper.
* '''Print black''': Activate this option if the courses should be printed in black. Use this setting for making printing films.
* '''Mirror''': Activate this option if the courses should be mirrored. This is used for making printing films on laser or inkjet printers.


'''Landscape'''
=== Select Courses/Classes ===
Check this field to print the map in landscape format.
Choose wheter you want to select '''[[Create a New Course|Courses]]''' or '''[[Create a New Class|Classes]]'''. Select all courses/classes to be printed. Select several courses/classes by holding the '''Ctrl''' key or all courses/classes by clicking the '''All''' button.


 
=== Print Relay Courses ===
'''Range'''
 
*'''Entire map:''' Select this option to print the entire map. If the map is too large for one page, it will be printed on several pages.
 
*'''Partial map:''' Select this option to print a part of the map. Click Setup [[File:Setup.JPG|setup]] to define the partial map to be printed. The dialog box Setup Partial Map (Printing) appears. Click the button Entire Map [[File:EntireMap.JPG|entire map]] to print the entire map. Click the button Current View [[File:ToCurrentView.JPG|to current view]] to print the currently on the screen displayed map.
 
*'''One page:''' Select this option to print one page of paper of the map. Click the button Setup [[File:Setup.JPG|setup]] to define the region to be printed. The dialog box Setup One Page appears.
 
*'''Course only on already printed map:''' Select this option if you want to print courses on existing maps or if you want to make printing films for courses. If this is activated, only one page is printed. Click Setup [[File:Setup.JPG|setup]] to define the region to be printed. The dialog box [[Print_Courses#Course _Only|Course Only]] appears.
 
 
'''Select'''
 
'''Courses:''' Choose courses to print the courses.
 
'''Classes:''' Choose classes to print the classes. You can assign classes to a course in dialog box Classes.
 
Select here the courses or classes to be printed.
 
You can select a range of courses or classes:
 
Click the '''Select all''' button to select all courses or classes.
 
 
'''Map scale'''
This line shows the scale of the map. Choose Scale and Coordinate System from the Map menu to set the map scale.
 
 
'''Print scale'''
Enter the scale for the printed map. You can enter the scale on the keyboard, or choose one of the predefined scales. If the print scale is different from the map scale, the map and the symbols are enlarged/reduced according to the ratio of the 2 scales.
 
 
'''Copies'''
Enter the number of copies to be printed.
 
 
'''Options'''
Click this button to change printing options (intensity, line width, grid). The dialog box Printing options appears.
 
 
== Course Only ==
This dialog box appears if you click Setup for printing courses only on already printed maps in the Print Courses dialog box.
 
Adjust the bottom left corner of print range.
 
'''Interval'''
Set the interval step for 1 click on an adjustment button.
 
'''Left, Right, Up, Down'''
Click on the adjustment buttons Left, Right, Up or Down to adjust the print range in relation to the map. The left/right and up/down adjustment is displayed on the left side of the dialog box.
 
'''Horizontal Scaling, Vertical Scaling'''
Enter here a scaling to adjust the course to an already printed map. Normally you will need here only very small corrections (99...101%) caused by the shrinking of the paper.
 
'''Print black'''
Activate this option if the courses should be printed in black. Use this setting for making printing films.
 
'''Mirror'''
Activate this option if the courses should be mirrored. This is used for making printing films on laser or inkjet printers.
 
 
== Print Relay Courses ==


Relay courses normally have variations. The start number and the leg number define the course for a specific runner. You can anytime reprint the course for a specific runner under the condition that nothing in the variations has been changed.
Relay courses normally have variations. The start number and the leg number define the course for a specific runner. You can anytime reprint the course for a specific runner under the condition that nothing in the variations has been changed.


In dialog caption you can see the course or class name.
Read the '''[[Create_Relay_Courses#Print_a_Relay_Course|Print a Relay Course]]''' article for more information.
 
'''Variants'''
 
'''All''' Choose this option to print all relay variants.
 
'''Variant''' Choose this option to print a specific relay variant. All variants are displayed in list box.
 
 
'''Start numbers'''<br>
Select here the start numbers to be printed. You can only print start numbers which are in the range defined in the Class dialog box.
 
'''All''' Choose this option to print all start number.
 
'''Number(s)''' Choose this option and enter a number to print a specific start number (e.g. 23) or a specific range (e.g 23-31).
 
 
'''Legs'''
 
'''All''' Choose this option to print all (first, second runner of the teams...) relay legs.
 
'''Leg''' Choose this option to print only a specific.
 
 
 




Back to [[Course Setting for Orienteering]]
----
Back to the '''[[Course Setting for Orienteering]]''' page.

Version vom 5. Juli 2012, 16:09 Uhr

(This function is only available in course setting projects!)

Choose the Courses command in the Print submenu of the Course Setting menu to print courses.

The Print Courses box appears on the right side of the screen. Adjust the settings which can be made in the Printer, Page handling, Scale and Options part with help of the Printing Maps page. The differences of the Print Courses to the Print box are that there is no Color field but in addition a Select Courses/Classes field. The Print map size field has the extra option Course only on already printed map.

Print Course Only

Choose the Course only on already printed map option from the Print map size part of the Print Courses box. Click the Setup.JPG Setup button.

The Course Only dialog appears:
Adjust bottom left corner of the print range:

  • Intervall: Set the interval step for 1 click on an adjustment button (Left, Up, Right, Down).
  • Left, Up, Right, Down: Click on the adjustment buttons Left, Up, Right or Down to adjust the print range in relation to the map. The left/right and up/down adjustment is displayed on the left side of the dialog box, in the Adjustment part.
  • Horizontal Scaling, Vertical Scaling: Enter here a scaling to adjust the course to an already printed map. Normally you will need here only very small corrections (99...101%) caused by the shrinking of the paper.
  • Print black: Activate this option if the courses should be printed in black. Use this setting for making printing films.
  • Mirror: Activate this option if the courses should be mirrored. This is used for making printing films on laser or inkjet printers.

Select Courses/Classes

Choose wheter you want to select Courses or Classes. Select all courses/classes to be printed. Select several courses/classes by holding the Ctrl key or all courses/classes by clicking the All button.

Print Relay Courses

Relay courses normally have variations. The start number and the leg number define the course for a specific runner. You can anytime reprint the course for a specific runner under the condition that nothing in the variations has been changed.

Read the Print a Relay Course article for more information.


Back to the Course Setting for Orienteering page.

Abgerufen von „http://ocad.com/wiki/ocad11/de/index.php?title=Bahnen_drucken&oldid=4034“