Bahnen drucken: Unterschied zwischen den Versionen

Aus OCAD 11 Wiki - Deutsch
Zur Navigation springen Zur Suche springen
Zeile 72: Zeile 72:
 
'''Mirror'''
 
'''Mirror'''
 
Activate this option if the courses should be mirrored. This is used for making printing films on laser or inkjet printers.
 
Activate this option if the courses should be mirrored. This is used for making printing films on laser or inkjet printers.
 +
 +
 +
== Print Relay Courses ==
 +
 +
Relay courses normally have variations. The start number and the leg number define the course for a specific runner. You can anytime reprint the course for a specific runner under the condition that nothing in the variations has been changed.
 +
 +
In dialog caption you can see the course or class name.
 +
 +
'''Variants'''
 +
 +
'''All''' Choose this option to print all relay variants.
 +
 +
'''Variant''' Choose this option to print a specific relay variant. All variants are displayed in list box.
 +
 +
 +
'''Start numbers'''<br>
 +
Select here the start numbers to be printed. You can only print start numbers which are in the range defined in the Class dialog box.
 +
 +
'''All''' Choose this option to print all start number.
 +
 +
'''Number(s)''' Choose this option and enter a number to print a specific start number (e.g. 23) or a specific range (e.g 23-31).
 +
 +
 +
'''Legs'''
 +
 +
'''All''' Choose this option to print all (first, second runner of the teams...) relay legs.
 +
 +
'''Leg''' Choose this option to print only a specific.
 +
  
  

Version vom 11. Mai 2012, 12:14 Uhr

(This function is only available in course setting projects!)


Choose this command for printing courses.


Printer Select the printer to print the map. In the box you can select one of the installed Windows printer drivers. Click the Properties button to change printing options.

Landscape Check this field to print the map in landscape format.


Range

  • Entire map: Select this option to print the entire map. If the map is too large for one page, it will be printed on several pages.
  • Partial map: Select this option to print a part of the map. Click Setup setup to define the partial map to be printed. The dialog box Setup Partial Map (Printing) appears. Click the button Entire Map entire map to print the entire map. Click the button Current View to current view to print the currently on the screen displayed map.
  • One page: Select this option to print one page of paper of the map. Click the button Setup setup to define the region to be printed. The dialog box Setup One Page appears.
  • Course only on already printed map: Select this option if you want to print courses on existing maps or if you want to make printing films for courses. If this is activated, only one page is printed. Click Setup setup to define the region to be printed. The dialog box Course Only appears.


Select

Courses: Choose courses to print the courses.

Classes: Choose classes to print the classes. You can assign classes to a course in dialog box Classes.

Select here the courses or classes to be printed.

You can select a range of courses or classes:

Click the Select all button to select all courses or classes.


Map scale This line shows the scale of the map. Choose Scale and Coordinate System from the Map menu to set the map scale.


Print scale Enter the scale for the printed map. You can enter the scale on the keyboard, or choose one of the predefined scales. If the print scale is different from the map scale, the map and the symbols are enlarged/reduced according to the ratio of the 2 scales.


Copies Enter the number of copies to be printed.


Options Click this button to change printing options (intensity, line width, grid). The dialog box Printing options appears.


Course Only

This dialog box appears if you click Setup for printing courses only on already printed maps in the Print Courses dialog box.

Adjust the bottom left corner of print range.

Interval Set the interval step for 1 click on an adjustment button.

Left, Right, Up, Down Click on the adjustment buttons Left, Right, Up or Down to adjust the print range in relation to the map. The left/right and up/down adjustment is displayed on the left side of the dialog box.

Horizontal Scaling, Vertical Scaling Enter here a scaling to adjust the course to an already printed map. Normally you will need here only very small corrections (99...101%) caused by the shrinking of the paper.

Print black Activate this option if the courses should be printed in black. Use this setting for making printing films.

Mirror Activate this option if the courses should be mirrored. This is used for making printing films on laser or inkjet printers.


Print Relay Courses

Relay courses normally have variations. The start number and the leg number define the course for a specific runner. You can anytime reprint the course for a specific runner under the condition that nothing in the variations has been changed.

In dialog caption you can see the course or class name.

Variants

All Choose this option to print all relay variants.

Variant Choose this option to print a specific relay variant. All variants are displayed in list box.


Start numbers
Select here the start numbers to be printed. You can only print start numbers which are in the range defined in the Class dialog box.

All Choose this option to print all start number.

Number(s) Choose this option and enter a number to print a specific start number (e.g. 23) or a specific range (e.g 23-31).


Legs

All Choose this option to print all (first, second runner of the teams...) relay legs.

Leg Choose this option to print only a specific.



Back to Course Setting for Orienteering