Print a map
- Select Print in the File menu, press Ctrl+P or click on the Print icon in the standard toolbar. The Print dialog appears on the right hand side of the window.
- Select the printer to print the map. In the box you can select one of the installed Windows printer drivers. Click the Properties button to change printing options.
- In the Page handling box you can set the page orientation (Portrait or Landscape) and the number of copies you would like to print.
- Decide between Color printing or Spot color separations (Black & White printing) in the next box. Select the second option to print black and withe spot color separations. Choose Define Spot Colors from the Map menu to define spot colors. When this radio button is activated and spot colors are defined, you can select one or more of the defined spot colors in the Spot colors list box.
- Define the print scale in the Scale box. You can enter the scale on the keyboard, or choose one of the predefined scales. If the print scale is different from the map scale, the map and the symbols are enlarged/reduced according to the ratio of the map and print scales.
- In the Print map size box you have the following options:
- Entire map: The entire map will be printed. Gray frames show a print preview on the basis of the defined paper size in the printer settings. If the map is too large for one page, it will be printed on several pages. Click on the Setup icon to make more adjustments.
- Part of map: Print a part of the map. If you choose this option a thin black and a grey frame appear. The thin black frame shows the area which is to be printed, the grey frame shows the paper size. Adjust the thin black frame to your desired map part. More information about setting up Part of the Map can be found further down on this page.
- One page: Select this option to print one page of paper of the map. Click the Setup button to define the region to be printed. More information about setting up One Page can be found further down on this page.
- If you cannot see the frame, click Zoom out in the View menu until the frame becomes visible.
- Move the mouse pointer inside the rectangle to drag the entire rectangle. Drag a corner or one side to resize the rectangle.
- 7. In the Options box you can make the following adjustments:
- Intensity: For older ink jet printers you can reduce the color intensity here. This reduces the amount of ink applied.
- Line width: For older ink jet printers you can reduce the line width here. This reduces the amount of ink applied.
- Print screen grid: Check this box to print a grid on the map. Choose the color of the grid in the drop-down list.
- 8. Click Print to print out the respective area.
- Click Save XML to save an XML file with the print settings (Same filename and path as OCAD map). Use Execute XML Script command in File menu to print the map with the settings saved in the XML file.
Hide the background map before printing the map, if you do not want this to be printed out as well. If you are still in Draft mode, select Normal Mode in the View menu.
Setup Part of Map
First, choose between Paper or Real World Coordinates. In the Print map size part of the dialog, you can make the following adjustments:
- Choose between the Reference point, width and height and the Rectangle option. When you choose the first option:
- Choose the point of the map which you want to define as the reference point (e.g. upper left corner). Click one of the nine squares.
- Enter the coordinate of the chosen point.
- Enter the dimension (Width and Height) of the map to be printed in m (real world coordinates) or mm (paper coordinates).
- If the Rectangle option was chosen:
- Enter the coordinate of the bottom left and the top right corner of the rectangle to be printed in m (real world coordinates) or mm (paper coordinates).
- Set the vertical and horizontal overlap. If the map does not fit to one page, the given overlap is printed on both pages, therefore the maps are overlapping.
- Click on Set from selected object to set the map boundaries fitting.
- You can name the adjustments and save them by clicking the Save button.
- If there are saved settings, you can load them using the Load button or delete them using the Delete button.
- Click the OK button when finished.
The overlap values can be negative. This can be useful when printing the courses for relays in orienteering. Place the start number and or advertisement to be printed on the back side beside the map. With a negativ overlap a gap between the two pages is created.
Setup One Page
In this dialog you have to set the bottom left corner of the page to be printed in mm (paper coorinates) or m (when you have Set a Coordinate System). Click the OK button when finished.
Due to color display, we recommend you to always create a PDF first out of OCAD and print this PDF afterwards. OCAD works with CMYK Colors and they will only be displayed correctly this way. What you see on your screen are RGB-Colors from the Windows Graphics Device Interface (GDI). When you print maps directly out of OCAD, the Windows GDI converts the CMYK values first in RGB values and your printer driver back to CMYK values. This way it may come to changes in the color values.
Back to Main Page